Crimped One Piece Hose Fittings

Easy to assemble and match with braid or spiral hoses

Answer your questions about One Piece Fittings

One-piece crimp fittings is also called hose coupling, because ferrule is pre-crimped onto the hose tails permanently. Crimp dies ensure the correct press assembly by part numbers of hose fittings and ferruels, it makes hose assembly simple and quick.

Match with Standards of Hydraulic Hose

One piece hose coupling fittings match with  standards of wire braided hydraulic hose and wire spiral hydraulic hose:

Wire braid hoses including one wire braid hose and two wire braid hose, meet SAE 100R1AT/100R2AT, EN 853 1SN/2SN.

Four wire sprial hoses meet SAE 100R12, EN 856 4SP/4SH.

Assembly of One Piece Hose Fittings

Before assembly, wire braid hoses is no-skive cover, but wire spiral hose need to skive hose cover for stronger connections from Fitsch. But Ryco one piece crimp couplings already eliminate the need to skive the cover, we also can offer.

1 Piece spiral hose fittings assemble with hose, just need insert the nipple of fittings into the hose inner hole, and the socket will be on the hose cover, then crimped outside of the socket, and crimped tight the fitting and hose together, after crimped, the hose assembly need withstand the burst pressure and impulse testing etc. with no leakage.

Connection Types of One Piece Hose Fittings

For Hose Tails Types:  Wire Braide Crimped One Piece Hose Fittings and Wire Spiral Crimped One Piece Hose Couplings.

For Tube Adapter Types: 24 Degree Cone Tube ends ISO 8434-1 and ISO 8434-4; 60 Degree Cone Tube Ends ISO 8434-6 and BS 5200; JIC 37 Degree Flare Tube Ends ISO 8434-2 and SAE J514; O-ring Face Seal Tube Ends ISO 8434-3 and SAE J1453; SAE Four Bolt Flange Head Ends ISO 6162-1/-2 and SAE J518 Code 61/62.

Overvies Catalog of One Piece Hose Fittings

Overvies Catalog of One Piece Hose Fittings