Braided Hose Ferrule Types
Braided hose ferrule is most popular type of hydraulic ferrule, it is used to assemble hydraulic hose fitting for low medium high pressure braided hoses, hydraulic hose assembly is permanently joined by crimper. The teeth in crimped fitting bit down to the flexible hose wire for a metal to metal grip with maximum integrity.
We offer stainless steel, carbon steel of braided hose ferrule fittings for types of hydraulic hose as follows:
Ferrule for SAE R14 PTFE Hose
Ferrule for SAE 100R7 Thermoplastic Hose
Ferrule for 1SN R1AT Hose
Ferrule for 2SN R2AT Hose
Braided Hose Ferrule Size Chart
Hose Ferrule Dash size is named as inside diameter of flexible hose for inserting hose tail end(as picture), match with different outside diameter of hydraulic hose with different wire steel braided, but also use the same dash size for ferrules, with different inside diameter of ferrule as follow Dimension Table.
BRAIDED HOSE | FERRULE INSIDE DIAMETER | ||||
DN | DASH | INCH | 1SN R1AT | 2SN R2AT | 100R7 |
5 | 3 | 3/16" | 12.6 | 14.1 | 10.8 |
6 | 4 | 1/4" | 14 | 15.7 | 13.4 |
8 | 5 | 5/16" | 15.6 | 17.3 | 15.1 |
10 | 6 | 3/8" | 18 | 19.6 | 17 |
12 | 8 | 1/2" | 21.5 | 22.8 | 20.8/22.5 |
16 | 10 | 5/8" | 24.5 | 26.6 | 26.5 |
20 | 12 | 3/4" | 28.7 | 30.3 | 27.4 |
25 | 16 | 1" | 36.3 | 38.8 | 35 |
32 | 20 | 1 1/4" | 45 | 49.6 | |
40 | 24 | 1 1/2" | 51.5 | 56 | |
50 | 32 | 2" | 65 | 68.8 | |
Braided Hose Ferrule Catalog
