Ferrule and hose tail fittings is two separate part, without pre-crimped ferrule into hose tail fittings(one piece hose fittings). 2 piece hydraulic hose fittings provide a powerful assembly for the fitting and hoses, creating a metal to metal connection on both inside and outside of hydraulic hose. It is very import to select the correct ferrule and hose fitting for crimping type of hose assembly.
Selection of ferrule and hose fittings as follows:
For one wire braid hoses with SAE 100R1AT 1T, EN853 1SN, suitable ferrule series of 00110 and 03310; For compact wire braid hose with SAE 100R17, EN 857 1SC,suitable ferrule series of
For two wire braid hose with SAE 100R2AT 2T and EN853 2SN, suitable ferrule series of 03310; For compact wire braid hose with SAE 100R16, EN857 2SC, suitable ferrule series of .
For two fabric braid hose EN 854 2TE, suitable ferrule series of 002TE.
For two polyester braid hose SAE 100R7 R7(EN 856 R7), suitable ferrule series of 00018
These types of hydraulic hoses(1 or 2 braid wire type) match hose fittings series of xxxx1.
For four wire spiral hose SAE 100R12, EN 856 R12, EN 856 4SP, EN 856 4SH, suitable ferrules of 00400, match hose fittings series of xxxx2
For six wire spiral hose SAE 100R13, EN 856 R13, suitable ferrules of 00621, match hose fittings series of xxxx2
Hose, Ferrule and Fittings Combination Selecting Table
Hose Part
No. | DN DASH | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 25 | 32 | 38 | 50 |
-3 | -4 | -5 | 6 | -8 | -10 | -12 | -16 | -20 | -24 | -32 |
1T 1SN | Ferrules | 00110-03A | 00110-04A | 00110-05A | 0011D-06A | 0011D-0BA | 00110-10A | 00110-12A | 00110-16A | 00110-20 | 00110-24 | 00110-32 |
Fittings | xxxx1- |
2T
2SN | Ferrules | 03310-03 | 03310-04 | 03310-05 | 03310-06 | 03310-08 | 03310-10 | 03310-12 | 03310-16 | 03310-20 | 03310-24 | 03310-32 |
Fittings | xxxx1- |
2TE | Ferrules | 002TE-03 | 002TE-04 | 002TE-05 | 002TE-06 | 002TE-08 | 002TE-10 | 002TE-12 | 002TE-16 | 002TE-20 |
|
|
Fittings | xxxx1- |
R7 | Ferrules | 00018-03 | 00018-04 | 00018-05 | 00018-06 | 00018-08 | 00018-10 | 00018-12 |
|
|
|
|
Fittings | xxxx1(s)- |
R12 | Ferrules |
| 00400-04 |
| 00400-06 | 00400-08 | 00400-10 | 00400-12 | 00400-16 | 01400-20 | 01400-24 | 00401-32 |
Fittings | xxxx2- |
4SP | Ferrules |
| 00400-04 |
| 00400-O6 | 00400-08 | 00400-10 | 00400-12 | 00400-16 | 00400-20 | 00400-24 | 00400-32 |
Fittings | xxxx2- |
4SH | Ferrules |
|
|
|
|
| 00400-10 | 00400-12 | 00400-16 | 00401-20 | 00401-24 | 00401-32 |
Fittings | xxxx2- |
R13 | Ferrules |
|
|
|
|
|
| 00621-12 | 00621-16 | 00621-20 | 00621-24 | 00621-32 |
Fittings | xxxx3- |
R17 | Ferrules |
| 00110-04A | 00110-054 | 0011D-06A | 00110-08A | 03310-10 | 03310-12 | 03310-16 |
|
|
|
Fittings | xxxx1- |
Types of two piece hose fittings
From hose tail end to various connect types as follows:
DIN 24 degree cone tube connector ISO 8434-1 and ISO 8434-4 male and female swivel hose fitting ISO12151-2
SAE ORFS O-ring face seal tube connector ISO 8434-3 male and female swivel type ISO 12151-1
SAE JIC 37 degree flare tube connector ISO 8434-2 male and female swivel type ISO 12151-5
BSP 60 degree cone tube connector ISO 8434-5 male and female swivel type ISO 12151-6
SAE J518 code 61/code flange end connector ISO 6162-1 and ISO 6162-2 type ISO 12151-3
Metric stud end ISO 6149 type ISO 12151-4
Banjo Metric DIN 7642 type
NPT male and male NPT swivel type
SAE O-ring boss end and Male swivel SAE ORB end type
Catalog of two piece hose fittings
