SAE Flange Clamp Metric Thread

SAE one piece flange clamp with metric thread hole dimensions chart
Meet SAE J518-1 and -2 / ISO 6162-1 and -2 Standard
L Series Working Pressure is 3000 psi, from 3,5 MPa (35 bar) to 35 MPa (350 bar)
S Series Working pressure is 6000 psi, use at a pressure of 42 MPa (420 bar),
L Series Nominal flange size is from DN 13 to DN 127
S Series Nominal flange size from is from DN 13 to DN 76
Stainless steel SAE flange flat clamp Code 61 Code 62
Surface of Zinc plated pass a minimum 72-h salt spray test in accordance with ISO 9227.

Port End Connection Types:
Four bolt split flange

Availability:



Inquire PDF Export

SAE Flange Clamp Flat Type Code 61 Dimensions of FL-WM Series White Zinc plated CrVI free

SAE Flange Clamp Metric Thread SIZE CHART

PART NO.	FLANGE SIZE	DIMENSIONS						MPa
PART NO.	FLANGE SIZE	A	B	d	h	M	N	MPa
SAE 3000PSI FLANGE CLAMP WITH METRIC TAPPED
FL-08WM	12"	54	45.6	M8	6.2	38.1	17.5	34.5
FL-12WM	34"	65	51.8	M10	6.2	47.6	22.2
FL-16WM	1"	70	58.4	M10	7.5	52.4	26.2
FL-20WM	1.14"	79	72.6	M10	7.5	58.7	30.2	27.6
FL-24WM	1.12"	94	82.2	M12	7.5	69.9	35.7	20.7
FL-32WM	2"	102	96.4	M12	9	77.8	42.9	20.7
FL-40WM	2.12"	114	108.2	M12	9	88.9	50.8	17.2
FL-48WM	3"	135	130.6	M16	9	106.4	61.9	13.8
SAE 6000PSI FLANGE CLAMP WITH METRIC TAPPED
FS-08WM	1/2"	56	47.2	M8	7.2	40.5	18.2	42
FS-12WM	3/4"	71	60	M10	8.2	50.8	23.8
FS-16WM	1"	81	69.9	M12	9	57.2	27.8
FS-20WM	1.14"	95	77.2	M14	9.8	66.6	31.8
FS-24WM	1.12"	113	95	M16	12	79.3	36.5
FS-32WM	2"	133	113.8	M20	12	96.8	44.5