BSPP flat face port, Metric flat face port
Elbow
| Availability: | |
|---|---|
| PDF Export | |
Fitsch is a trusted manufacturer of high-pressure centralized lubrication system terminal blocks engineered to streamline maintenance workflows across demanding heavy machinery industries. Our premium greasing blocks with elbow drilling provide an optimal mechanical path for complex layouts, consolidating multiple grease lines into an easily accessible hub. When straight line runs are restricted by structural components or tight clearances, these intersecting cross-drilled terminal manifolds ensure uncompromised fluid path routing and reliable lubricant flow under maximum system stress.
High-Performance Engineering & Flow Control
Unlike standard distribution blocks, a true elbow drilling grease block utilizes precisely machined, perpendicular internal channels to redirect lubricants at right angles. This heavy-duty T drilling lubrication block architecture allows maintenance technicians to feed high-pressure grease or oil safely around tight corners without placing bending stress on fluid tubes or flexible hoses. Acting as a core industrial grease block divider, these components ensure uniform pressure distribution across all connected bearings, maximizing equipment lifespans and eliminating critical assembly failure points.
Technical Specifications & Material Construction
To guarantee absolute compliance with international industrial standards, our 90 degree lubrication manifold product line is offered in multiple physical sizes and high-strength material grades:
Thread Port Configurations: Standard sizes include the high-demand metric M10x1 elbow grease manifold profile, alongside standard imperial variations like our 1/8 BSP right angle distributor block to fit global machinery setups.
Material Selection: Precision-machined as a zinc plated steel lubrication terminal block treated with a CrVI-free anti-corrosion layer for general agricultural or automotive environments, or built as a 316-grade stainless steel block for marine and highly corrosive applications.
Scalable Port Volume: Available as a standard right angle grease distribution block or as an expanded multi port elbow greasing block configuration ranging from 1 to 10 fluid channels with secure multi-hole mounting bases.
Step-by-Step Installation Guide
Add this instructional section directly to your product page copy to capture informative search queries from field mechanics and service technicians:
Select the Terminal Mounting Location: Choose a clean, flat surface on the machinery framework that protects the lubrication block from mechanical impact or flying road debris while remaining accessible for grease gun service.
Drill and Secure the Block: Mark the mounting holes using the block as a template. Secure the distribution block using two standard M6 structural bolts through the integrated Ø 6.5 mm mounting clearance holes. Torque down firmly to eliminate equipment vibration.
Install the Right-Angle Port Fittings: Screw your 24° cone tube connectors or hose stud adapters into the inlet and outlet ports. For tapered threads (NPT/Metric Taper), use high-pressure liquid thread sealant. For parallel threads (BSPP/Metric Parallel), verify the status of the sealing washer or O-ring flange.
Connect Your Feed Lines: Push your pre-cut lubrication lines (plastic tubing, steel tubes, or flexible high-pressure hoses) cleanly into the fittings. Assemble using a DIN 3870 coupling nut and DIN 3861 cutting ring sequence, tightening the compression nuts to the specified torque rating.
Seal Off Unused Output Ports: If your circuit configuration changes, ensure any empty distribution ports are capped tight with dedicated hexagonal closure plugs to prevent high-pressure grease leaks or ambient moisture contamination.
Pressure Test the Lubrication System: Cycle the centralized automated lubrication pump or inject grease manually using a high-pressure hand gun. Inspect every cross-drilled elbow joint to confirm an absolute, leak-free mechanical seal across all terminal nodes.
What is the maximum operating pressure for Fitsch elbow-drilled greasing blocks?
Our heavy-duty right-angle grease distribution blocks are designed specifically for high-pressure industrial systems. They safely handle continuous operating pressures up to 400 bar (5,800 PSI) and more. Every block undergoes strict quality control testing to ensure structural integrity under repetitive pump pressure cycles.
How does a E-drilled elbow block differ internally from a standard straight block?
Standard straight blocks feature single-axis parallel drilled channels where fluid goes directly from top to bottom. An elbow-drilled block uses intersecting right-angle channels (E-drilling) machined via precision CNC lines. This architecture routes the lubrication line feed at a clean 90-degree turn internally, cutting out the need for external right-angle hydraulic adapter fittings.
Which thread size option should I select for a progressive centralized lubrication system?
The standard choice for European and global progressive systems is the metric M10x1 thread, which matches standard cutting ring connections and lubrication hose studs. If you are replacing parts on British or American heavy machinery, select the 1/8" BSP thread variant. Both sizes maintain a tight mechanical seal when properly torqued.
Can I request custom mounting base sizes or alternative materials?
Yes. While our standard stock is manufactured as a CrVI-free zinc-plated steel lubrication terminal block with a 20x20 mm profile, we also supply custom dimensions. Fitsch operates over 200 CNC machines to manufacture custom blocks in premium brass or 316 marine-grade stainless steel to meet your exact engineering blueprints.
