Views: 7 Author: Site Editor Publish Time: 2026-10-12 Origin: Site
Table of Contents
In modern industrial maintenance, minimizing downtime during machinery assembly is critical. Automated lubrication networks rely on a high-efficiency alternative to traditional threaded pipe fittings. By shifting from manual wrench tightening to an advanced tool-free pipe connection, push-in line configurations allow technicians to quickly plug lines into a pre-installed port. This dramatically cuts assembly times, especially within difficult-to-access machinery pockets.
A centralized lubrication system relies on robust, leak-free conduits to move lubricants from a central pump out to progressive metering blocks, pressure switches, and terminal bearings. The comprehensive catalog of SKF tubes, hoses and fittings fulfills this need across the entire system. It utilizes internal locking mechanisms to grip lines tightly, keeping connections perfectly secure even under immense structural stress. These fittings are universally compatible with both flexible polyamide plastic and hard steel lines, provided the steel piping is correctly prepared beforehand.
To source these specialized components or review broader technical integration layouts, parts can be selected via the global SKF Lubrication Management Portal or custom-ordered through precision suppliers like Fitsch Centralized Lubrication Fittings, an established Chinese industrial partner with over 18 years of fluid connector expertise engineering compliant ISO and DIN solutions. Both options provide seamless access to authentic Lincoln lubrication components.
For rigid, heavy-duty routing in high-vibration or environmentally hostile areas, SKF mandates specific steel standards:
Standard Galvanized Steel: Precision hydraulic seamless piping engineered strictly to EN 10305-4 specifications, featuring a fully Cr-6-free (hexavalent chromium-free) protective surface treatment.
Stainless Steel Material (1.4571): Specially deployed for aggressive conditions or corrosive settings. It provides excellent chemical resistance against sea water exposure, harsh industrial cleaning agents, and high-moisture paper manufacturing environments.
Polyamide Plastic Tubes
For flexible routing and easier tracking through tight curves, SKF provides diverse grades of Polyamide (PA) plastic lines, categorized by their flexibility and color:
PA12H (Natural): A semi-rigid, uncolored polyamide line optimized for standard stable tracks.
PA12HL (Black): A semi-rigid, UV-stabilized black polyamide variant.
PA12PH (Natural): A highly flexible, uncolored polyamide tube for moving or articulating joints.
PA12PHL (Black): A highly flexible, UV-stabilized black polyamide tube engineered for dynamic machinery linkages.
When rigid lines cannot absorb machine movements or vibrations, SKF offers factory-assembled low-pressure hose segments integrated with metal end-fittings:
Low-pressure hoses for main lines (Max 45 bar / 652 psi): Optimized specifically to connect the main pump block to primary distribution manifolds. These lines feature an integrated pipe stud on both ends to slide cleanly into standard compression couplings or push-in port interfaces.
Secondary lines with pipe studs (Max 15 bar / 217 psi): Tailored for the down-stream lines running directly from the metering feeders to final bearing friction points. These lightweight hoses come equipped with a pipe stud on both ends for low-pressure terminations.
For operators managing custom field layouts or performing on-site machinery retrofits, bulk uncut hosing paired with field-attachable hardware eliminates the need for expensive workshop crimping machinery:
Low-pressure hose for self-installation (Max 45 bar / 652 psi): Flexible bulk hosing that can be easily chopped to custom lengths on-site for custom main line layout designs.
High-pressure hose for self-installation: Built with reinforced structural layers to withstand intense pressure surges inside automated grease networks. Supplied in bulk coils up to 50 meters, they can be deployed alongside specialized field-attachable fittings to create customized high-pressure links on the fly.
Thread joints for high-pressure hose: Specialized, field-attachable threaded ends designed to be screwed directly onto raw high-pressure lines. For highly flexible custom-made configurations, these are categorized by their geometric orientation:
Hose coupling straight: Used for linear, direct tool-free hookups spanning between components. These can be browsed on the Fitsch Lubrication Hose Fittings Portal to match precise thread profiles.
Hose coupling bent (90° Elbow): Tailored with a rigid pre-bent angle to reroute piping safely around sharp frame edges or machine hazards without crimping the underlying flexible hose material.
Threaded sleeve: The mechanical outer jacket required to lock self-installation hose assemblies together. The threaded sleeve features a reverse internal thread that screws counter-clockwise directly onto the outer jacket of the raw hose, creating a rigid base so the straight or bent hose coupling insert can drive deep into the inner tube to form a high-pressure, leak-proof seal.
Pre-Filled Convenience: Fast installation is achieved because selected lines can be ordered pre-filled with standard NLGI grade 2 grease or lubricating oil, reducing system priming and de-airing downtime during initial field setup.
Pressure Management: Dimensional selection (matching inner diameters and wall thicknesses) is tightly calibrated to manage occurring pressure demands while eliminating system pressure drops.
Versatility: A wide range of available material versions allows configuration matching for nearly any industrial factory blueprint. Technical configuration drawings are available through the SKF Products and Services Index.
As a trusted sourcing alternative for automated distribution block networks, Fitsch acts as a premier supplier of industrial central lubrication components. Operating an advanced production facility housing over 200 high-precision CNC machines, Fitsch delivers strict quality-controlled fluid components adhering to international ISO, DIN, and SAE engineering standards. Whether you require stainless steel central lubrication adapters or complete custom automotive tube assemblies, Fitsch serves global supply chains with highly competitive options matching Parker or Eaton interchange standards.
Order number | Product name | Designation | Material |
|---|---|---|---|
Plastic tubing semirigid (without plasticizer) | |||
WVN715‑RO2 5X0 5 | Semirigid plastic tube | TUBE,PA12H 2,5x 0,5 NATUR | PA12H polyamide 12 semirigid unplasticized |
WVN715‑RO4X0 85 | Semirigid plastic tube | TUBE,PA12H 4,0x 0,85 NATUR | PA12H polyamide 12 semirigid unplasticized |
WVN715RO4X0 85+A89 | Semirigid plastic tube | TUBE,PA12HL 4,0x 0,85 BLACK | PA12HL polyamide12 semirigid unplasticized UV‑stabilized black |
112‑35127‑7 | Semirigid plastic tube | TUBE, PA12HL 4,0x 1,0 BLACK | PA12HL polyamide12 semirigid unplasticized UV‑stabilized black |
112‑35127‑5 | Semirigid plastic tube | TUBE,PA12HL 4,0x 1,0 NATUR | PA12HL polyamide12 semirigid unplasticized UV‑stabilized natural |
WVN715‑RO6X1 | Semirigid plastic tube | TUBE,PA12H 6,0x 1,0 NATUR | PA12H polyamide 12 semirigid unplasticized |
WVN715‑RO6X1 25 | Semirigid plastic tube | TUBE,PA12H 6,0x 1,25 NATUR | PA12H polyamide 12 semirigid unplasticized |
WVN715RO6X1 25+A89 | Semirigid plastic tube | TUBE,PA12HL 6,0x 1,25 BLACK | PA12HL polyamide12 semirigid unplasticized UV‑stabilized black |
112‑35127‑2 | Semirigid plastic tube | TUBE,PA12HL 6,0x 1,5 BLACK | PA12HL polyamide12 semirigid unplasticized UV‑stabilized black |
WVN715‑RO8x1 25 | Semirigid plastic tube | TUBE,PA12H 8,0x 1,25 NATUR | PA12H polyamide 12 semirigid unplasticized |
WVN715‑RO10X1 5 | Semirigid plastic tube | TUBE,PA12H 10,0x 1,5 NATUR | PA12H polyamide 12 semirigid unplasticized |
WVN715RO10X1 5+A89 | Semirigid plastic tube | TUBE,PA12HL 10,0x 1,5 BLACK | PA12HL polyamide12 semirigid unplasticized UV‑stabilized black |
Plastic tubing flexible (containing plasticizer) | |||
WVN716‑RO4X0 85 | Flexible plastic tube | TUBE,PA12PH 4,0x 0,85 NATUR | PA12PH polyamide12 flexible plasticized |
WVN716RO4X0 85+A89 | Flexible plastic tube | TUBE,PA12PHL 4,0x 0,85 BLACK | PA12PHL polyamide12 flexible plasticized UV‑stabilized black |
112‑35225‑4 | Flexible plastic tube | TUBE,PA12PHL 4,0x 1,0 BLACK | PA12PHL polyamide12 flexible plasticized UV‑stabilized black |
WVN716‑RO6X1 25 | Flexible plastic tube | TUBE,PA12PH 6,0x 1,25 NATUR | PA12PH polyamide12 flexible plasticized |
WVN716RO6X1 25+A89 | Flexible plastic tube | TUBE,PA12PHL 6,0x 1,25 BLACK | PA12PHL polyamide12 flexible plasticized UV‑stabilized black |
WVN716‑RO8X1 25 | Flexible plastic tube | TUBE,PA12PH 8,0x 1,25 NATUR | PA12PH polyamide12 flexible plasticized |
Tube and hose protections‑Corrugated tube | |||
982‑760‑120 | Corrugated protection tube | TUBE,CORRUGATED PA6 NW8 BLACK | Polyamide 6 black |
982‑760‑130 | Corrugated protection tube | TUBE,CORRUGATED PA6 NW10 BLACK | Polyamide 6 black |
982‑760‑160 | Corrugated protection tube | TUBE,CORRUGATED PA6 NW12 BLACK | Polyamide 6 black |
Tube and hose protections‑Spring coil | |||
982‑760‑122 | Protection spring coil | SPRING COIL DI6,1xD1,2 1 4310 | Stainless steel 1.4310 |
982‑760‑132 | Protection spring coil | SPRING COIL DI10,6xD1,2 1 4310 | Stainless steel 1.4310 |
982‑760‑142 | Protection spring coil | SPRING COIL DI13,5xD1,5 1 4310 | Stainless steel 1.4310 |
111‑35306‑5 | Protection spring coil | SPRING COIL DI17XD1 8 1 4310 | Stainless steel 1.4310 |
Tube and hose protections‑Plastic helix | |||
113‑35075‑2 | Plastic protection helix | PLASTIC HELIX GR 6 BLACK | Polyethylene black |
113‑35075‑3 | Plastic protection helix | PLASTIC HELIX GR 12 BLACK | Polyethylene black |
Tube and hose protections‑Spiral hose slotted | |||
982‑760‑102 | Slotted spiral protective hose | SPIRAL HOSE PP NW8 SLOTTED | Polypropylene |
982‑760‑172 | Slotted spiral protective hose | SPIRAL HOSE PP NW15 SLOTTED | Polypropylene |
Steel tubing | |||
982‑120‑041 | Steel tube | TUBE, E235+N D 4,0x 0,7 CF | Galvanized steel Cr‑6‑free |
982‑120‑040 | Steel tube | TUBE, E235+N D 4,0x 1,0 CF | Galvanized steel Cr‑6‑free |
982‑120‑061 | Steel tube | TUBE, E235+N D 6,0x 0,7 CF | Galvanized steel Cr‑6‑free |
105‑35251‑1 | Steel tube | TUBE, E235+N D 6,0x 1,0 CF | Galvanized steel Cr‑6‑free |
105‑35251‑3 | Steel tube | TUBE, E235+N D 8,0x 1,0 CF | Galvanized steel Cr‑6‑free |
982‑120‑100 | Steel tube | TUBE, E235+N D 10,0x 1,0 CF | Galvanized steel Cr‑6‑free |
105‑35025‑5 | Steel tube | TUBE, E235+N D 10,0x 1 5 CF | Galvanized steel Cr‑6‑free |
105‑35134‑3 | Steel tube | TUBE, E235+N D 12,0x 1,5 CF | Galvanized steel Cr‑6‑free |
105‑35134‑9 | Steel tube | TUBE, E235+N D 15,0x 1,5 CF | Galvanized steel Cr‑6‑free |
105‑35183‑3 | Steel tube | TUBE, E235+N D 16,0x 2,0 CF | Galvanized steel Cr‑6‑free |
982‑120‑180 | Steel tube | TUBE, E235+N D 18,0x 1,0 CF | Galvanized steel Cr‑6‑free |
105‑35134‑1 | Steel tube | TUBE, E235+N D 20,0x 2,0 CF | Galvanized steel Cr‑6‑free |
105‑35308‑1 | Steel tube | TUBE, E235+N D 28,0x 2,0 CF | Galvanized steel Cr‑6‑free |
105‑35134‑4 | Steel tube | TUBE, E235+N D 30,0x 3,0 CF | Galvanized steel Cr‑6‑free |
Stainless steel tubing | |||
D1127RO2 5x0 5+A46 | Stainless steel tube | TUBE,NIRO 1 4301 D 2,5x0,5 | Stainless steel 1.4301 /1.4306 |
DIN2462‑RO4x1+A46 | Stainless steel tube | TUBE,NIRO 1 4301 D 4,0x1,0 | Stainless steel 1.4301 /1.4306 |
106‑35203‑4 | Stainless steel tube | TUBE,NIRO 1 4571 D 6,0x1,0 | Stainless steel 1.4571 |
106‑35203‑3 | Stainless steel tube | TUBE,NIRO 1 4571 D 8,0x1,0 | Stainless steel 1.4571 |
DIN2462‑RO10x1+A46 | Stainless steel tube | TUBE,NIRO 1 4301 D 10,0x1,0 | Stainless steel 1.4301 /1.4306 |
106‑35203‑2 | Stainless steel tube | TUBE,NIRO 1 4571 D 10,0x1,5 | Stainless steel 1.4571 |
106‑35203‑1 | Stainless steel tube | TUBE,NIRO 1 4571 D 20,0x2,0 | Stainless steel 1.4571 |
106‑35292‑2 | Stainless steel tube | TUBE,NIRO 1 4571 D 22,0x2,0 | Stainless steel 1.4571 |
106‑35292‑1 | Stainless steel tube | TUBE,NIRO 1 4571 D 28,0x2,0 | Stainless steel 1.4571 |
106‑35203‑7 | Stainless steel tube | TUBE,NIRO 1 4571 D 30,0x3,0 | Stainless steel 1.4571 |
106‑35231‑1 | Stainless steel tube | TUBE,NIRO 1 4301 D 6,0x1,0 | Stainless steel 1.4301 |
106‑35231‑2 | Stainless steel tube | TUBE,NIRO 1 4301 D 8,0x1,0 | Stainless steel 1.4301 |
106‑35231‑3 | Stainless steel tube | TUBE,NIRO 1 4301 D 10,0x1,5 | Stainless steel 1.4301 |
106‑35231‑6 | Stainless steel tube | TUBE,NIRO 1 4301 D 20,0x2,0 | Stainless steel 1.4301 |
106‑35267‑4 | Stainless steel tube | TUBE,NIRO 1 4301 D 22,0x2,0 | Stainless steel 1.4301 |
Low‑pressure hoses max.45 bar with pipe stud both ends | |||
714‑180 | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 180,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
714‑220 | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 220,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
714‑260 | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 260,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
714‑300 | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 300,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
714‑380 | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 380,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
714‑420 | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 420,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
714‑450 | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 450,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
714‑500 | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 500,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
714‑580 | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 580,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
714‑180‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 180,STU 4 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel pipe ends |
714‑260‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 260,STU 4 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel pipe ends |
714‑300‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 300,STU 4 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel pipe ends |
714‑400‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 400,STU 4 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel pipe ends |
714‑500‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 500,STU 4 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel pipe ends |
714‑580‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 580,STU 4 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel pipe ends |
716‑220 | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 220,STU 6 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
716‑300 | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 300,STU 6 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
716‑340 | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 340,STU 6 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
716‑380 | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 380,STU 6 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
716‑420 | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 420,STU 6 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
716‑500 | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 500,STU 6 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
716‑580 | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 580,STU 6 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
716‑300‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 300,STU6 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel pipe ends |
716‑400‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 400,STU6 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel pipe ends |
716‑500‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 500,STU6 MET BRAID | CR‑rubberber inner, rayon+galvanized steel wire braid, steel pipe ends |
718‑340 | Low‑pressure assembled hose | HOSE,CR 45 DN 6,5x 340,STU 8 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
718‑450 | Low‑pressure assembled hose | HOSE,CR 45 DN 6,5x 450,STU 8 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
718‑580 | Low‑pressure assembled hose | HOSE,CR 45 DN 6,5x 580,STU 8 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
718‑400‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 6,5x 400,STU 8 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel pipe ends |
718‑500‑M | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 6,5x 500,STU 8 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel pipe ends |
Low‑pressure hoses max.45 bar with tapered‑sleeve socket union both ends | |||
714‑180‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 180,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
714‑220‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 220,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
714‑260‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 260,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
714‑300‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 300,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
714‑380‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 380,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
714‑420‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 420,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
714‑450‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 450,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
714‑500‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 500,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
714‑580‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 3x 580,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
714‑180‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 180,M8x1 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
714‑260‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 260,M8x1 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
714‑300‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 300,M8x1 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
714‑400‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 400,M8x1 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
714‑500‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 500,M8x1 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
714‑580‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 3x 580,M8x1 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
716‑220‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 220,M10x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
716‑300‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 300,M10x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
716‑340‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 340,M10x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
716‑380‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 380,M10x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
716‑420‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 420,M10x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
716‑500‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 500,M10x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
716‑580‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 580,M10x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
716‑300‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 300,M10x1 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
716‑400‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 400,M10x1 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
716‑450‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 450,M10x1 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
716‑500‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN 4,5x 500,M10x1 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
718‑400‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 6,5x 400,M14x1,5 | CR‑rubber inner, rayon braid, galvanized steel fittings |
718‑450‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 6,5x 450,M14x1,5 | CR‑rubber inner, rayon braid, galvanized steel fittings |
718‑500‑K | Low‑pressure assembled hose | HOSE,CR 45 DN 6,5x 500,M14x1,5 | CR‑rubber inner, rayon braid, galvanized steel fittings |
718‑400‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN6,5x 400,M14x1,5 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
718‑450‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN6,5x 450,M14x1,5 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
718‑500‑MK | Metal‑braided low‑pressure assembled hose | HOSE,CR 45 DN6,5x 500,M14x1,5 MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, steel fittings |
Low‑pressure hoses max.45 bar with claw‑groove for quick‑connectors | |||
714‑180‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 3x 180,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
714‑220‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 3x 220,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
714‑260‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 3x 260,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
714‑300‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 3x 300,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
714‑380‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 3x 380,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
714‑420‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 3x 420,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
714‑450‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN3x 450,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
714‑500‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 3x 500,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
714‑580‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 3x 580,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
714‑180‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 3x 180,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
714‑260‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 3x 260,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
714‑300‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 3x 300,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
714‑400‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 3x 400,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
714‑500‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 3x 500,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
714‑580‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 3x 580,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
716‑220‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 4,5x 220,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
716‑300‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 4,5x 300,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
716‑380‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 4,5x 380,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
716‑420‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 4,5x 420,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
716‑500‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 4,5x 500,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
716‑580‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 4,5x 580,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
716‑300‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 4,5x 300,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
716‑400‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 4,5x 400,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
716‑450‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 4,5x 450,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
716‑500‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 4,5x 500,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
718‑340‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 6,5x 340,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
718‑450‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 6,5x 450,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
718‑580‑VS | Quick‑connector compatible low‑pressure hose | HOSE,CR 45 DN 6,5x 580,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
718‑400‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 6,5x 400,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
718‑450‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 6,5x 450,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
718‑500‑M‑VS | Metal‑braided quick‑connector compatible hose | HOSE,CR 45 DN 6,5x 500,VS MET BRAID | CR‑rubber inner, rayon+galvanized steel wire braid, claw‑groove studs |
Low‑pressure secondary‑line hose max.15 bar pipe‑stud ends | |||
734‑180 | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 180,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
734‑220 | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 220,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
734‑260 | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 260,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
734‑300 | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 300,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
734‑380 | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 380,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
734‑420 | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 420,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
734‑450 | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 450,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
734‑500 | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 500,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
734‑580 | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 580,STU 4 | CR‑rubber inner, rayon braid, galvanized steel pipe ends |
Low‑pressure secondary‑line hose max.15 bar tapered‑sleeve union ends | |||
734‑180‑K | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 180,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
734‑220‑K | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 220,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
734‑260‑K | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 260,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
734‑300‑K | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 300,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
734‑380‑K | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 380,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
734‑420‑K | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 420,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
734‑450‑K | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 450,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
734‑500‑K | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 500,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
734‑580‑K | Secondary‑line low‑pressure hose | HOSE,CR 15 DN 3x 580,M8x1 | CR‑rubber inner, rayon braid, galvanized steel fittings |
Low‑pressure secondary‑line hose max.15 bar claw‑groove for quick‑connectors | |||
734‑180‑VS | Secondary‑line quick‑connector hose | HOSE,CR 15 DN 3x 180,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
734‑220‑VS | Secondary‑line quick‑connector hose | HOSE,CR 15 DN 3x 220,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
734‑260‑VS | Secondary‑line quick‑connector hose | HOSE,CR 15 DN 3x 260,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
734‑300‑VS | Secondary‑line quick‑connector hose | HOSE,CR 15 DN 3x 300,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
734‑380‑VS | Secondary‑line quick‑connector hose | HOSE,CR 15 DN 3x 380,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
734‑420‑VS | Secondary‑line quick‑connector hose | HOSE,CR 15 DN 3x 420,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
734‑450‑VS | Secondary‑line quick‑connector hose | HOSE,CR 15 DN 3x 450,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
734‑500‑VS | Secondary‑line quick‑connector hose | HOSE,CR 15 DN 3x 500,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
734‑580‑VS | Secondary‑line quick‑connector hose | HOSE,CR 15 DN 3x 580,VS | CR‑rubber inner, rayon braid, galvanized steel claw‑groove studs |
Self‑assembly low‑pressure hose components‑Hose coupling | |||
406‑704‑001 | Straight hose coupling BEL version | HOSE COUPLING STRAIGHT D4 BEL | Steel, galvanized |
406‑706‑001 | Straight hose coupling BEL version | HOSE COUPLING STRAIGHT D6 BEL | Steel, galvanized |
406‑708‑001 | Straight hose coupling BEL version | HOSE COUPLING STRAIGHT D8 BEL | Steel, galvanized |
406‑704‑001‑VS | Straight hose coupling VS claw‑groove version | HOSE COUPLING STRAIGHT D4 VS | Steel, galvanized |
406‑706‑001‑VS | Straight hose coupling VS claw‑groove version | HOSE COUPLING STRAIGHT D6 VS | Steel, galvanized |
406‑708‑001‑VS | Straight hose coupling VS claw‑groove version | HOSE COUPLING STRAIGHT D8 VS | Steel, galvanized |
Self‑assembly low‑pressure hose components‑Threaded sleeve | |||
406‑804‑001 | Hose threaded sleeve | THREADED SLEEVE F HOSE STUD D4 | Brass |
406‑806‑001 | Hose threaded sleeve | THREADED SLEEVE F HOSE STUD D6 | Brass |
406‑808‑001 | Hose threaded sleeve | THREADED SLEEVE F HOSE STUD D8 | Brass |
Self‑assembly low‑pressure hose components‑Bulk hose | |||
WVN701‑4 | Bulk low‑pressure hose | HOSE,CR 45 DN 3 | Perbunan rubber, rayon braid |
WVN701‑6 | Bulk low‑pressure hose | HOSE,CR 45 DN 4,5 | Perbunan rubber, rayon braid |
WVN701‑8 | Bulk low‑pressure hose | HOSE,CR 45 DN 6,5 | Perbunan rubber, rayon braid |
Self‑assembly high‑pressure hose‑Bulk hose | |||
111‑35114‑1 | High‑pressure flexible hose | HOSE PL300 NW4,0 HIGHFLEXIBLE | Polyamide inner, polyurethane outer, polyester reinforcement |
1110‑00000002 | High‑pressure flexible hose coil | HP HOSE 8,6/4,1‑PA6/PUR‑BK COIL50M | Polyamide inner, polyurethane outer, polyester reinforcement |
982‑750‑111 | High‑pressure flexible hose | HOSE, PL400 NW6,0 HIGHFLEXIBLE | Polyamide inner, polyurethane outer, polyester reinforcement |
1110‑00000001 | High‑pressure flexible hose coil | HP HOSE 11,3/6,4‑PA6/PUR‑BK COIL50M | Polyamide inner, polyurethane outer, polyester reinforcement |
WVN711‑10 | High‑pressure rubber hose | HOSE, 3TE,NW8,0 HIGHFLEXIBLE | Synthetic rubber |
High‑pressure hose threaded joints‑Threaded sleeve | |||
853‑540‑010 | High‑pressure hose threaded sleeve | THREADED SLEEVE F HOSE STUD D 6 | Zinc‑nickel Cr‑6‑free coated steel |
432‑23031‑1 | High‑pressure hose threaded sleeve | THREADED SLEEVE F HOSE STUD D 6 | Zinc‑nickel Cr‑6‑free coated steel |
406‑808‑005 | High‑pressure hose threaded sleeve | THREADED SLEEVE F HOSE STUD D 8 | Zinc‑nickel Cr‑6‑free coated steel |
406‑810‑002 | High‑pressure hose threaded sleeve | THREADED SLEEVE F HOSE STUD D10 | Zinc‑nickel Cr‑6‑free coated steel |
432‑23676‑1 | High‑pressure hose threaded sleeve | THREADED SLEEVE F HOSE STUD D6 VA | Stainless steel 1.4305 |
406‑808‑005‑S3 | High‑pressure hose threaded sleeve | THREADED SLEEVE F HOSE STUD D 8 VA | Stainless steel 1.4571 |
High‑pressure hose threaded joints‑Hose stud with claw‑groove VS version | |||
853‑380‑006‑VS | Straight hose stud VS claw‑groove | HOSE STUD STRAIGHT D4/NW2 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑370‑002‑VS | Straight hose stud VS claw‑groove | HOSE STUD STRAIGHT D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑380‑002‑VS | Straight hose stud VS claw‑groove | HOSE STUD STRAIGHT D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑380‑005‑VS | Straight hose stud VS claw‑groove | HOSE STUD STRAIGHT D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑390‑002‑VS | Straight hose stud VS claw‑groove | HOSE STUD STRAIGHT D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑390‑006‑VS | 10° angle hose stud VS claw‑groove | HOSE STUD 10DEGREE D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑390‑005‑VS | 30° angle hose stud VS claw‑groove | HOSE STUD 30DEGREE D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑380‑004‑VS | 45° angle hose stud VS claw‑groove | HOSE STUD 45DEGREE D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑380‑007‑VS | 45° angle hose stud VS claw‑groove | HOSE STUD 45DEGREE D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑390‑004‑VS | 45° angle hose stud VS claw‑groove | HOSE STUD 45DEGREE D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑380‑003‑VS | 90° elbow hose stud VS claw‑groove | HOSE STUD 90DEGREE D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
853‑390‑003‑VS | 90° elbow hose stud VS claw‑groove | HOSE STUD 90DEGREE D6/NW4 VS | Zinc‑nickel Cr‑6‑free coated steel |
406‑708‑005‑VS | Straight hose stud VS claw‑groove | HOSE STUD STRAIGHT D8/NW6 VS | Zinc‑nickel Cr‑6‑free coated steel |
855‑380‑002‑VS | Stainless steel straight hose stud VS | HOSE STUD VA STRAIGHT D6/NW4 VS | Stainless steel 1.4571 |
855‑380‑003‑VS | Stainless steel 90° hose stud VS | HOSE STUD VA 90DEGREE D6/NW4 VS | Stainless steel 1.4305 |
432‑24162‑1 | Short straight hose stud VS claw‑groove | HOSE STUD STRAIGHT D6/NW4 VS SHORT | Zinc‑nickel Cr‑6‑free coated steel |
532‑30739‑1 | Short 90° hose stud VS claw‑groove | HOSE STUD 90DEGREE D6/NW4 VS SHORT | Zinc‑nickel Cr‑6‑free coated steel |
High‑pressure hose threaded joints‑Standard BEL‑version hose stud | |||
853‑370‑002 | Straight hose stud BEL version | HOSE STUD STRAIGHT D6/NW4 BEL | Zinc‑nickel Cr‑6‑free coated steel |
853‑380‑002 | Straight hose stud BEL version | HOSE STUD STRAIGHT D6/NW4 BEL | Zinc‑nickel Cr‑6‑free coated steel |
853‑390‑002 | Straight hose stud BEL version | HOSE STUD STRAIGHT D6/NW4 BEL | Zinc‑nickel Cr‑6‑free coated steel |
853‑390‑005 | Straight hose stud BEL version | HOSE STUD STRAIGHT D6/NW4 BEL | Zinc‑nickel Cr‑6‑free coated steel |
853‑380‑004 | 45° angle hose stud BEL version | HOSE STUD 45DEGREE D6/NW4 BEL | Zinc‑nickel Cr‑6‑free coated steel |
853‑380‑003 | 90° elbow hose stud BEL version | HOSE STUD 90DEGREE D6/NW4 BEL | Zinc‑nickel Cr‑6‑free coated steel |
853‑390‑003 | 90° elbow hose stud BEL version | HOSE STUD 90DEGREE D6/NW4 BEL | Zinc‑nickel Cr‑6‑free coated steel |
853‑390‑004 | 90° elbow hose stud BEL version | HOSE STUD 90DEGREE D6/NW4 BEL | Zinc‑nickel Cr‑6‑free coated steel |
406‑708‑005 | Straight hose stud BEL version | HOSE STUD STRAIGHT D8/NW6 BEL | Zinc‑nickel Cr‑6‑free coated steel |
406‑708‑006 | Straight hose stud BEL version | HOSE STUD STRAIGHT D8/NW6 BEL | Zinc‑nickel Cr‑6‑free coated steel |
406‑708‑007 | Straight hose stud BEL version | HOSE STUD STRAIGHT D8/NW6 BEL | Zinc‑nickel Cr‑6‑free coated steel |
406‑708‑009 | 45° angle hose stud BEL version | HOSE STUD 45DEGREE D6/NW4 BEL | Zinc‑nickel Cr‑6‑free coated steel |
406‑708‑008 | 90° elbow hose stud BEL version | HOSE STUD 90DEGREE D8/NW6 BEL | Zinc‑nickel Cr‑6‑free coated steel |
406‑710‑002 | Straight hose stud BEL version | HOSE STUD STRAIGHT D10/NW8 BEL | Zinc‑nickel Cr‑6‑free coated steel |
855‑380‑002 | Stainless steel straight hose stud BEL | HOSE STUD VA STRAIGHT D6/NW4 BEL | Stainless steel 1.4305 |
855‑380‑003 | Stainless steel 90° hose stud BEL | HOSE STUD VA 90DEGREE D6/NW4 BEL | Stainless steel 1.4305 |
406‑708‑005‑S3 | Stainless steel straight hose stud BEL | HOSE STUD STRAIGHT D8/NW6 BEL | Stainless steel 1.4571 |
