Views: 38 Author: Site Editor Publish Time: 2022-12-26 Origin: Site
The flareless bite type DIN hydraulic fitting was pioneered by Ermeto in Germany. When Parker acquired Ermeto, it introduced the EO fittings to the US. Today, the EO fittings are the most widely used bite type fittings in the world.
The EO progressive ring fitting is a flareless metric fitting (for metric tube)that consists of a body, a progressive ring (ferrule) and a nut. On assembly, two cutting edges of the progressive ring bite into the outer surface of the tube ensuring the necessary holding power and seal for high operating pressures.
Three series of EO tube fittings (LL, L and S) and accessories are manufactured in accordance with DIN 2353 (summary) which today is represented by international standard 8434-1 on the basis of decades of experience.
Example:
GE12ZSR1/2EDCF
Straight male stud,
EO-2, 12 mm tube O.D., heavy series, G 1/2 BSPP, Eolastic seal,
complete with nut and ring, Cr(VI)-free steel fitting,
all seals NBR
GE12LR71X
Straight male stud,
12 mm tube O.D., light series, G 3/8 BSPP, metal seal type B, stainless steel fitting, body only
EVT08LOMDMS
Adjustable standpipe branch tee,
8 mm tube O.D., light series, brass fitting without nut and ring, standpipe preassembled with nut and ring.
EL38VITOMDCF
Adjustable swivel nut run tee
38 mm tube O.D., heavy series,
zinc-plated steel fitting without nut and ring.
Swivel nut end with FKM seal
Codes for Parker DIN Hydraulic Fittings/Styles Shapes
BUZ | Blanking plug for cones |
BUZM | Blanking plug with nut for cones |
D | Cutting ring – EO 24° cone end |
DA | Distance piece adapter – EO 24° DKO swivel/EO 24° cone end |
DKA | Sealing ring for banjo fittings WH/TH and SWVE |
DKAZ | Sealing ring for low pressure banjos DSVW |
DKI | Sealing ring for pressure gauge connectors |
DOZ | EO-2 Soft sealing ring |
DPR | Progressive ring – EO 24° cone end |
DSVW-M | Low pressure banjo elbow – EO 24° cone end/Male metric thread |
DSVW-R | Low pressure banjo elbow – EO 24° cone end/Male BSPP thread |
E | Tube/hose insert for plastic tubing |
ED | Eolastic soft seal (for BSPP and metric parallel threads) |
EGE-M-ED | Swivel connector – Male metric thread – ED-seal (ISO 9974)/EO 24° DKO swivel |
EGE-NPT | Swivel connector – Male NPT thread (SAE J476)/EO 24° DKO swivel |
EGEO | Swivel connector – Male metric thread – O-ring (ISO 6149)/EO 24° DKO swivel |
EGE-R-ED | Swivel connector – Male BSPP thread – ED-seal (ISO 1179)/EO 24° DKO swivel |
EL | Swivel nut run tee – EO 24° cone end/EO 24° DKO swivel |
EL-M-ED | Assembled adjustable swivel run tee – EO 24° cone end/Male metric thread – ED-seal (ISO 9974) |
EL-R-ED | Assembled adjustable swivel run tee – EO 24° cone end/Male BSPP thread – ED-seal (ISO 1179) |
ET | Swivel nut branch tee – EO 24° cone end/EO 24° DKO swivel |
ET-M-ED | Assembled adjustable swivel branch tee – EO 24° cone end/Male metric thread – ED-seal (ISO 9974) |
ET-R-ED | Assembled adjustable swivel branch tee – EO 24° cone end/Male BSPP thread – ED-seal (ISO 1179) |
EV | Swivel nut 45° elbow – EO 24° cone end/EO 24° DKO swivel |
EVGE-M-ED | Standpipe connector – Male metric thread – ED (ISO 9974)/EO standpipe adjustable |
EVGE-R-ED | Standpipe connector – Male BSPP thread – ED-seal (ISO 1179)/EO standpipe adjustable |
EVL | Standpipe run tee – EO 24° cone end/EO stand pipe adjustable |
EVL-M | Assembled adjustable standpipe run tee – EO 24° cone end/Male metric thread – metal sealing edge (ISO 9974) |
EVL-R | Assembled adjustable standpipe run tee – EO 24° cone end/Male BSPP thread – metal sealing edge (ISO 1179) |
EV-M-ED | Assembled adjustable swivel 45° elbow – EO 24° cone end/Male metric thread – ED-seal (ISO 9974) |
EV-R-ED | Assembled adjustable swivel 45° elbow – EO 24° cone end/Male BSPP thread – ED-seal (ISO 1179) |
EVT | Standpipe branch tee – EO 24° cone end/EO stand pipe adjustable |
EVT-M | Assembled adjustable standpipe branch tee – EO 24° cone end/Male metric thread – metal sealing edge (ISO 9974) |
EVT-R | Assembled adjustable standpipe branch tee – EO 24° cone end/Male BSPP thread – metal sealing edge (ISO 1179) |
EVW | Standpipe elbow – EO 24° cone end/EO stand pipe adjustable |
EVW-M | Assembled adjustable standpipe elbow – EO 24° cone end/Male metric thread – metal sealing edge (ISO 9974) |
EVW-R | Assembled adjustable standpipe elbow – EO 24° cone end/Male BSPP thread – metal sealing edge (ISO 1179) |
EW | Swivel nut elbow – EO 24° cone end/EO 24° DKO swivel |
EW-M-ED | Assembled adjustable swivel elbow – EO 24° cone end/Male metric thread – ED-seal (ISO 9974) |
EW-R-ED | Assembled adjustable swivel elbow – EO 24° cone end/Male BSPP thread – ED-seal (ISO 1179) |
FM | EO2 Functional nut |
FORM | EO2-FORM Set |
G | Union – EO 24° cone end |
GAI-M | Female connector – Female metric thread (ISO 9974-1)/EO 24° cone end |
GAI-NPT | Female connector – Female NPT thread (SAE 476)/EO 24° cone end |
GAI-R | Female connector – Female BSPP thread (ISO 1179-1)/EO 24° cone end |
GE-M | Male stud connector – Male metric thread – metal sealing edge (ISO 9974)/EO 24° cone end |
GE-M (KEG) | Male stud connector – Male short metric taper thread (DIN 3852-1, type C)/EO 24° cone end |
GE-M-ED | Male stud connector – Male metric thread – ED (ISO 9974)/EO 24° cone end |
GE-NPT | Male stud connector – Male NPT thread (SAE J476)/EO 24° cone end |
GEO | Male stud connector – Male metric thread – O-ring (ISO 6149)/EO 24° cone end |
GE-R | Male stud connector – Male BSPP thread – metal sealing edge (ISO 1179)/EO 24° cone end |
GE-R (KEG) | Male stud connector – Male short BSP taper thread (DIN 3852-2, type C)/EO 24° cone end |
GE-R-ED | Male stud connector – Male BSPP thread – ED-seal (ISO 1179)/EO 24° cone end |
GE-UNF/UN | Male stud connector – Male UNF/UN thread – O-ring (ISO 11926)/EO 24° cone end |
GM | Locknut for bulkheads SV and WSV |
GR | Straight reducer – EO 24° cone end |
GZ | Swivel union – EO 24° DKO swivel |
GZR | Swivel reducer – EO 24° DKO swivel |
K | Union cross – EO 24° cone end |
KD | Soft sealing ring for banjo fittings WH/TH from stainless steel |
KDS | Soft sealing ring for banjo fittings SWVE, WH and TH from steel |
KOR | Tube end reducer – Steel and Brass – EO stand pipe adjustable/EO 24° cone end |
LEE | Adjustable locknut run tee – EO 24° cone end/Adjustable thread |
LE-M | Male stud run tee – EO 24° cone end/Male metric thread – metal sealing edge (ISO 9974) |
LE-M (KEG) | Male stud run tee – EO 24° cone end/Male short metric taper thread (DIN 3852-1, Form C) |
LE-R | Male stud run tee – EO 24° cone end/Male BSPP thread – metal sealing edge (ISO 1179) |
LE-R (KEG) | Male stud run tee – EO 24° cone end/Male short BSP taper thread (DIN 3852-2, type C) |
M | Nut- EO 24° Cone end |
MAV | Pressure gauge connector – Female BSPP thread/EO 24° cone end |
MAVE | Pressure gauge swivel connector – Female BSPP thread/EO 24° DKO swivel |
OR | O-ring |
PSR | Progressive stop ring – EO 24° cone end |
RED | Tube end reducer – EO 24° DKO swivel/EO 24° cone end |
RI | Thread reducer/expander – Male BSPP thread – metal sealing edge (ISO 1179)/Female BSPP thread (ISO 1179-1) |
RI-ED | Thread reducer/expander – Male BSPP thread – ED-seal (ISO 1179)/Female BSPP thread (ISO 1179-1) |
ROV | Blanking plug for tube ends – EO 24° cone end |
S | Sleeve screw – for threaded ports according to DIN 3854 |
SV | Bulkhead union – EO 24° cone end |
SWVE-M | Metric male stud banjo elbow – EO 24° cone end/Metric male stud with metal seal ring |
SWVE-M-KDS | Metric male stud banjo elbow – EO 24° cone end/Metric male stud with soft seal ring |
SWVE-R | BSPP male stud banjo elbow – EO 24° cone end/BSPP male stud with metal seal ring |
SWVE-R-KDS | BSPP male stud banjo elbow – EO 24° cone end/BSPP male stud with soft seal ring |
T | Union T – EO 24° cone end |
TEE | Adjustable locknut branch tee – EO 24° cone end/Adjustable thread |
TE-M | Male stud branch tee – EO 24° cone end/Male metric thread – metal sealing edge (ISO 9974) |
TE-M (KEG) | Male stud branch tee – EO 24° cone end/Male short metric taper thread (DIN 3852-1, type C) |
TE-R | Male stud branch tee – EO 24° cone end/Male BSPP thread – metal sealing edge (ISO 1179) |
TE-R (KEG) | Male stud branch tee – EO 24° cone end/Male short BSP taper thread (DIN 3852-2, type C) |
TH-M | High pressure banjo tee – EO 24° cone end/Male metric thread with metal sealing ring |
TH-M-KDS | High pressure banjo tee – EO 24° cone end/Male metric thread with soft seal ring |
TH-R | High pressure banjo tee – EO 24° cone end/Male BSPP thread with metal sealing ring |
TH-R-KDS | High pressure banjo tee – EO 24° cone end/Male BSPP thread with soft seal ring |
TR | Tee Reducer – EO 24° cone end |
VEE | Adjustable locknut 45° elbow – EO 24° cone end/Adjustable thread |
VH | Support sleeve for thin-walled metal tubing |
VKA | Blanking plug for cones – EO 24° DKO swivel |
VKAM | Blanking plug with nut for cone – EO 24° DKO swivel |
VSTI M/R-ED | Blanking plug for ports – Male metric thread – ED-seal (ISO 9974) – Male BSPP thread – ED-seal (ISO 1179) |
VSTI M-OR | Blanking plug for ports – Male metric thread – O-ring (ISO 6149) |
W | Union elbow – EO 24° cone end |
WEE | Adjustable locknut elbow – EO 24° cone end/Adjustable thread |
WE-M | Male stud elbow – EO 24° cone end/Male metric thread – metal sealing edge (ISO 9974) |
WE-M (KEG) | Male stud elbow – EO 24° cone end/Male short metric taper thread (DIN 3852-1. type C) |
WE-NPT | Male stud elbow – EO 24° cone end/Male NPT thread (SAE J476) |
WE-R | Male stud elbow – EO 24° cone end/Male BSPP thread – metal sealing edge (ISO 1179) |
WE-R (KEG) | Male stud elbow – EO 24° cone end/Male short BSP taper thread (DIN 3852-2, type C) |
WH-M | High pressure banjo elbow – EO 24° cone end/Male metric thread with metal sealing ring |
WH-M-KDS | High pressure banjo elbow – EO 24° cone end/Male metric thread with soft seal ring |
WH-R | High pressure banjo elbow – EO 24° cone end/Male BSPP thread with metal sealing ring |
WH-R-KDS | High pressure banjo elbow – EO 24° cone end/Male BSPP thread with soft seal ring |
WSV | Bulkhead elbow – EO 24° cone end |
External Links: