Views: 3 Author: Site Editor Publish Time: 2026-10-11 Origin: Site
A comprehensive, heavy-duty line of lubrication system adapters bridges different thread standards, pitch geometries, and system pressure ratings. These critical hardware components ensure an absolute, leak-free connection across progressive metering blocks, pump ports, and rigid pipeline nodes. Fitsch manufactures fully interchangeable, high-compliance alternatives to standard OEM layouts, giving procurement teams access to reliable, cost-efficient fluid routing links.
The complete port connection and adapter family relies on five distinct architectural categories:
Table of Contents
Engineered to safely transition between dissimilar thread sizes and system pressure zones, these thread reducing connectors are split across two core pressure-sealing mechanics:
Low-Pressure Applications: Cylindrical-thread reducers rated for operational metrics up to 45 bar. These styles rely strictly on a DIN 7603 sealing washers copper or aluminum ring seated flat against the port face.
High-Pressure Applications: Tapered-thread reducers rated for intense performance limits up to 350 bar, achieving a structural seal via thread interference. For compact or tight routing geometries, specialized 45° and 90° elbow reducing configurations are available to streamline direction changes.
RI-Series Cylindrical Thread Reducers
The heavy-duty RI-series comprises premium cylindrical thread reducers optimized for severe-duty automated networks. They safely handle maximum working pressures up to 400 bar. This specific series is ideal for adapting high-pressure pump outlets to standard mainline routing tubes without risking thread stripping or pressure-drop leakage.
Rotatable Banjo Adapters
When fluid routing layouts demand continuous flexibility or must negotiate tight 90-degree port clearances, implementing high-grade rotatable banjo adapters provides the ultimate solution. These assemblies consist of a cross-drilled banjo bolt and a smooth-swiveling ring body. They allow installers to orient the fluid discharge angle through a full 360-degree radius before final torque-down, preventing torsional strain on neighboring line networks.
Circuit Venting Plugs
Trapped air pockets within a grease line cause compressibility issues and system timing faults. Purpose-built circuit venting plugs are implemented at high system nodes to allow rapid circuit degassing during commissioning or maintenance cycles. These degassing parts are available in two primary styles:
Profile-Seal Variants: Utilizing a molded elastomer profile ring in strict compliance with ISO 9974-2.
Flat-Washer Variants: Sealed securely using standard compressible metal rings.
VSTI Screw Plugs and Sealing Components
To safely isolate unused manifold outlets, block ports, or indicator cavities, industrial lines utilize standard VSTI screw plugs. These durable hydraulic pipe plugs feature internal hex drives for flush, low-profile installations within compact machine housings. To fully support routine field maintenance and layout overhauls, Fitsch supplies comprehensive flat-washer assortment kits in bulk quantities. These kits feature high-purity copper and aluminum standard rings built to meet precise DIN 7603 dimensions.
By sourcing these critical sealing rings, port plugs, and structural extensions through the Fitsch industrial adapters factory, global purchasing groups can acquire premium components at highly competitive wholesale rates. Incorporating these premium-grade alternative automatic lubrication system components ensures absolute sealing integrity and protects heavy machinery lines from unexpected breakdown risks.
Order number | Designation | Material |
843-130-021 | ADAPTER ST M 3Ax M 5I CF | Steel, galvanized surface |
843-130-022 | ADAPTER ST M 4Ax M 5I CF | Steel, galvanized surface |
843-130-023 | ADAPTER ST M 5Ax M 5I CF | Steel, galvanized surface |
Order number | Designation | Material |
406-044-S1 | ADAPTER ST M10x14Kx R1/4I CF | Steel, galvanized surface |
Steel, galvanized surface
Order number | Designation | Material |
401-013-161 | ADAPTER ST G1/4Ax G1/2 CF | Steel, galvanized |
401-011-132 | ADAPTER ST G1/2Ax G1 CF | Steel, galvanized |
401-013-171 | ADAPTER ST G1/2Ax G1/2 CF | Steel, galvanized |
401-013-175 | ADAPTER ST M12x1,5Ax G1/4 CF | Steel, galvanized |
401-016-371 | ADAPTER ST M14x1,5Ax G1/4 CF | Steel, galvanized |
243-001-10 | ADAPTER ST M16x1,5Ax G1/2 CF | Steel, galvanized |
267-001-36 | ADAPTER ST M18x1,5Ax G3/8 CF | Steel, galvanized |
243-001-20 | ADAPTER ST M18x1,5Ax G1/2 CF | Steel, galvanized |
44-375-2025-2029 | ADAPTER ST M20x1,5Ax G3/4 CF | Steel, galvanized |
Brass
Order number | Designation | Material |
267-001-47 | ADAPTER MS G3/8Ax G3/4 | Brass |
267-001-60 | ADAPTER MS G3/8Ax G1/2 | Brass |
401-019-132 | ADAPTER MS G1/2Ax G1/8 | Brass |
D2333 | ADAPTER MS G1/2Ax G1/4 | Brass |
401-013-131 | ADAPTER MS G1/2Ax G1/2 | Brass |
D234 | ADAPTER MS G1/2Ax G3/8 | Brass |
D233 | ADAPTER MS G3/8Ax G1/4 | Brass |
267-001-03 | ADAPTER MS G3/8Ax G3/8 | Brass |
406-024 | ADAPTER MS M10x1Ax G3/8 | Brass |
401-016-312 | ADAPTER MS M10x1Ax G3/4 | Brass |
401-019-352 | ADAPTER MS M14x1,5Ax G1/8 | Brass |
Order number | Designation | Material |
248-610.01 | ADAPTER MS D 6AxG 1/4 | Brass |
Order number | Designation | Material |
301-134 | CONNECTING PIECE ST – M10x1 ZN | Steel, galvanized |
301-034 | CONNECTING PIECE ST – M14x1,5 ZN | Steel, galvanized |
Order number | Designation | Material |
304-19230-1 | ADAPTER R1/8 AxM10x1,0 CF | Steel, galvanized |
304-19787-1 | ADAPTER M 8x1,0xM 6x1,0Kx1,0KA CF | Steel, galvanized |
304-19437-1 | ADAPTER M 8x1,0KxAxM 8x1,0I CF | Steel, galvanized |
304-19548-1 | ADAPTER M 8x1,25KxAxM 8x1,0I CF | Steel, galvanized |
304-19167-1 | ADAPTER M 8x1,0KxAxG1/8 | Steel, galvanized |
304-19309-1 | ADAPTER M10x1,0KxM10x1,0 CF | Steel, galvanized |
304-16337-1 | ADAPTER M10x1Kx1KAxM10x1K CF | Steel, galvanized |
Order number | Designation | Material |
432-70673-1 | ELBOW FITT.ST 45DEGREE R1/8AxG1/8 CF | Steel, galvanized |
406-155K | ELBOW FITT.ST 45DEGREE R1/8AxM10x1,0I CF | Steel, galvanized |
406-165K | ELBOW FITT.ST 45DEGREE R1/8AxG1/8 CF | Steel, galvanized |
432-24050-1 | ELBOW FITT.ST 45DEGREE M8x1KxAxM8x1,0I CF | Steel, galvanized |
432-71483-1 | ELBOW FITT.ST 45DEGREE M8x1KxAxM10x1,0I CF | Steel, galvanized |
406-245K | ELBOW FITT.ST 45DEGREE M10x1KxAxM8x1,0I CF | Steel, galvanized |
406-045K | ELBOW FITT.ST 45DEGREE M10x1KxAxM10x1I CF | Steel, galvanized |
432-24051-1 | ELBOW FITT.ST 45DEGREE M10x1KxAxM8x1I CF | Steel, galvanized |
Order number | Designation | Material |
432-70674-1 | ELBOW FITT.ST.90DEGREE G1/8xR1/8A CF | Steel, galvanized |
406-091K | ELBOW FITT.ST.90DEGREE R1/8AxG1/8 CF | Steel, galvanized |
406-093K | ELBOW FITT.ST.90DEGREE R1/8AxM10x1,0I CF | Steel, galvanized |
406-092K | ELBOW FITT.ST.90DEGREE M8x1,25KxAxM8x1,25I CF | Steel, galvanized |
406-094K | ELBOW FITT.ST.90DEGREE M8x1KxAxM10x1I CF | Steel, galvanized |
406-096K | ELBOW FITT.ST.90DEGREE M10x1KxAxM8x1I CF | Steel, galvanized |
406-095K | ELBOW FITT.ST.90DEGREE M10x1KxAxM10x1I CF | Steel, galvanized |
432-24043-1 | ELBOW FITT.ST.90DEGREE M8x1KxAxM8x1I CF | Steel, galvanized |
432-24052-1 | ELBOW FITT.ST.90DEGREE M10x1KxAxM8x1I CF | Steel, galvanized |
Steel galvanized
Order number | Designation | Material |
222-12578-5 | BUSHING ST R1G 1/8AxG1/4 CF | Steel galvanized |
222-12578-1 | BUSHING ST R1G 1/4AxG1/8 CF | Steel galvanized |
222-12581-5 | BUSHING ST R1G 1/4AxG3/8 CF | Steel galvanized |
222-12521-6 | BUSHING ST R1G 1/4AxG1/2 CF | Steel galvanized |
222-12521-4 | BUSHING ST R1G 3/8AxG1/4 CF | Steel galvanized |
222-13672-3 | BUSHING ST R1G 3/8AxG1/2 CF | Steel galvanized |
222-12578-7 | BUSHING ST R1G 3/8AxG1/2 CF | Steel galvanized |
222-12578-3 | BUSHING ST R1G 3/8AxG3/4 CF | Steel galvanized |
222-12521-2 | BUSHING ST R1G 1/2AxG1/4 CF | Steel galvanized |
96-3102-0058 | BUSHING ST R1G 1/2AxG3/8 CF | Steel galvanized |
222-12599-3 | BUSHING ST R1G 1/2AxG3/4 CF | Steel galvanized |
222-12599-2 | BUSHING ST R1G 1/2AxG1 CF | Steel galvanized |
222-2047-2 | BUSHING ST R1G 1/2AxG3/8 CF | Steel galvanized |
222-2047-5 | BUSHING ST R1G 3/4AxG1/2 CF | Steel galvanized |
222-12578-7 | BUSHING ST R1G 3/4AxG1/4 CF | Steel galvanized |
222-12578-8 | BUSHING ST R1G 3/4AxG3/8 CF | Steel galvanized |
222-12578-4 | BUSHING ST R1G 3/4AxG1 CF | Steel galvanized |
96-3129-0058 | BUSHING ST R1G 3/4AxG1 1/4 CF | Steel galvanized |
222-12579-4 | BUSHING ST R1G 1AxG1/2 CF | Steel galvanized |
222-12579-9 | BUSHING ST R1G 1AxG3/8 CF | Steel galvanized |
96-3126-0058 | BUSHING ST R1G 1AxG1/4 CF | Steel galvanized |
222-12579-5 | BUSHING ST R1G 1AxG3/4 CF | Steel galvanized |
222-12579-2 | BUSHING ST R1G 1 1/4AxG3/8 CF | Steel galvanized |
96-3133-0058 | BUSHING ST R1G 1 1/4AxG1/2 CF | Steel galvanized |
222-13678-8 | BUSHING ST R1G 1 1/2AxG1/2 CF | Steel galvanized |
222-12521-1 | BUSHING ST R1G 1 1/4AxG3/4 CF | Steel galvanized |
222-12599-6 | BUSHING ST R1G 1 1/2AxG1 CF | Steel galvanized |
96-3112-0058 | BUSHING ST R1G 1 1/4AxG3/4 CF | Steel galvanized |
222-13678-3 | BUSHING ST R1G 1 1/2AxG1 CF | Steel galvanized |
96-3136-0058 | BUSHING ST R1G 2xG1 1/2AxG1 1/4 CF | Steel galvanized |
96-3137-0058 | BUSHING ST R1G 2AxG1 1/2 CF | Steel galvanized |
Stainless steel
Order number | Designation | Material |
222-13618-1 | BUSHING VA R1G 1/8AxG1/4 | Stainless steel 1.4571 |
222-10365-3 | BUSHING VA R1G 1/4AxG1/8 | Stainless steel 1.4571 |
222-12578-5 | BUSHING VA R1G 1/4AxG1/2 | Stainless steel 1.4571 |
222-12578-6 | BUSHING VA R1G 3/8AxG1/2 | Stainless steel 1.4571 |
222-12418-7 | BUSHING VA R1G 3/8AxG1/4 | Stainless steel 1.4571 |
222-12418-0 | BUSHING VA R1G 1/2AxG3/4 | Stainless steel 1.4571 |
222-12418-6 | BUSHING VA R1G 1/2AxG3/8 | Stainless steel 1.4571 |
222-12418-9 | BUSHING VA R1G 3/4AxG3/8 | Stainless steel 1.4571 |
222-13618-3 | BUSHING VA R1G 3/4AxG1/2 | Stainless steel 1.4571 |
222-12418-5 | BUSHING VA R1G 5/8AxG3/4 | Stainless steel 1.4571 |
Order number | Designation | Material |
091308 | Straight swivel 1/8 NPT | Steel galvanized |
223-12567-1 | Swivel 90° 1/8 NPT | Steel galvanized |
626-25702-1 | Swivel R1/4xR1/4 MS | Brass |
Order number | Designation | Material |
626-25716-2 | Swivel 90° G1/4AxG1/4AF | Steel galvanized |
626-25540-2 | Swivel 90° G1/4AxG1/8AF | Steel galvanized |
626-26700-2 | Swivel 90° G1/8AxD 4 F | Steel galvanized |
626-25438-2 | Swivel 90° G1/4AxD 4 F | Steel galvanized |
626-26701-2 | Swivel 90° G1/4AxD 4 F | Steel galvanized |
626-25717-2 | Swivel 90° G1/4AxD 6 F | Steel galvanized |
626-26696-2 | Swivel straight G1/8AxG1/4 CF | Steel galvanized |
Brass
Order number | Designation | Material |
DLY930-2 | ROTATING JOINT MS 8 G1/4A | Brass |
DLY931 | ROTATING JOINT MS 8 R1/8K | Brass |
Aluminum
Order number | Designation | Material |
DLY932 | ROTATING JOINT AL 8 R1/4K | Aluminum |
Order number | Designation | Material |
466-431-006 | VENTILATING SCREW.HEX ST M10x1 | Steel, galvanized |
466-431-005 | VENTILATING SCREW.6-SOCK ST M10x1 | Steel, galvanized |
466-431-009 | VENTILATING SCREW.6-SOCK ST G 1/8A | Steel, galvanized |
Order number | Designation | Material |
833-020-022 | VENTILATING SCREW ST M 8x1 | Steel, galvanized |
833-330-016 | VENTILATING SCREW ST M10x1 | Steel, galvanized |
833-330-021 | VENTILATING SCREW ST G 1/8A | Steel, galvanized |
833-340-034 | VENTILATING SCREW ST G 1/4A | Steel, galvanized |
Steel galvanized
Order number | Designation | Material |
466-419-001 | PLUG.CLOS.6-SOCK.VSTI G 1/8A-ED CF | Steel, galvanized |
223-13702-1 | PLUG.6-SOCK ST VSTI G1/4A-ED CF | Steel, galvanized |
223-13701-7 | PLUG.6-SOCK ST VSTI G 1/2A-ED CF | Steel, galvanized |
223-13702-6 | PLUG.6-SOCK ST VSTI G3/4A-ED CF | Steel, galvanized |
203-10530-4 | PLUG 6-SOCK ST VSTI G1A-ED CF | Steel, galvanized |
466-429-001 | PLUG.CLOS.6-SOCK VSTI M 8x1-ED CF | Steel, galvanized |
466-431-001 | PLUG.CLOS.6-SOCK VSTI M10x1-ED CF | Steel, galvanized |
466-439-001 | PLUG.CLOS.6-SOCK VSTI M18x1,5-ED CF | Steel, galvanized |
Stainless steel
Order number | Designation | Material |
223-13700-5 | PLUG 6-SOCK.VA VSTI G1/4A-ED | Stainless steel 1.4571 |
223-13702-9 | PLUG 6-SOCK.VA VSTI G1/2A-ED | Stainless steel 1.4571 |
Order number | Designation | Material |
DIN910-R1-8-5.8 | PLUG.CLOSURE-HEX. 5.8 G 1/8AZN | Steel, galvanized |
DIN910-R1-4x8-5.8 | PLUG.CLOSURE-HEX. 5.8 G 1/4AZN | Steel, galvanized |
DIN910-R3-8-5.8 | PLUG.CLOSURE-HEX. 5.8 G 3/8AZN | Steel, galvanized |
DIN910-R1-2-5.8 | PLUG.CLOSURE-HEX. 5.8 G 1/2AZN | Steel, galvanized |
DIN910-R3-4-5.8 | PLUG.CLOSURE-HEX. 5.8 G 3/4AZN | Steel, galvanized |
DIN910-R1-5.8 | PLUG.CLOSURE-HEX. 5.8 G1AZN | Steel, galvanized |
402-021 | PLUG.CLOSURE-HEX. ST M 6x1SwA10 | Steel, galvanized |
404-011 | PLUG.CLOSURE-HEX. ST M 8x1Sw11 | Steel, galvanized |
406-011 | PLUG.CLOSURE-HEX. ST M 10x1Sw12 | Steel, galvanized |
408-211 | PLUG.CLOSURE-HEX. ST M12x1,0A SW17 | Steel, galvanized |
408-011 | PLUG.CLOSURE-HEX. ST M12x1,5A SW17 | Steel, galvanized |
410-011 | PLUG.CLOSURE-HEX. ST M 14x1,5A SW19 | Steel, galvanized |
412-011 | PLUG.CLOSURE-HEX. ST M16x1,5A SW22 | Steel, galvanized |
DIN908-M10x1-5.8 | PLUG.CLOSURE-SOCK 5.8 M10x1,2ZN | Steel, galvanized |
DIN908-M12x1-5.8 | PLUG.CLOSURE-SOCK 5.8 M12x1,5ZN | Steel, galvanized |
DIN908-M14x1,5-5.8 | PLUG.CLOSURE-SOCK 5.8 M14x1,5ZN | Steel, galvanized |
DIN908-G1/8-5.8 | PLUG.CLOS6-SOCK 5.8 G 1/8AZN | Steel, galvanized |
DIN908-G3-8-5.8 | PLUG.CLOS6-SOCK 5.8 G 3/8AZN | Steel, galvanized |
Aluminum
Order number | Designation | Material |
504-019-AL | SEALING RING AL 10,2x13,9x1,1 | Aluminum |
Copper
Order number | Designation | Material |
DIN7603-A6x10-CU | SEALING RING CU 6,2x9,9x1,0 | Copper |
DIN7603-A8x11,5-CU | SEALING RING CU 8,2x11,4x1,0 | Copper |
504-019 | SEALING RING CU 10,2x13,9x1,1 | Copper |
508-215-CU | SEALING RING CU 12,2x15,9x1,4 | Copper |
508-205-CU | SEALING RING CU 12,2x15,9x2,0 | Copper |
DIN7603-A12x18-CU | SEALING RING CU 12,2x16,2x1,0 | Copper |
508-108 | SEALING RING CU 13,2x17,9x1,5 | Copper |
DIN7603-A14x18-CU | SEALING RING CU 14,2x17,9x1,5 | Copper |
DIN7603-A16x20-CU | SEALING RING CU 16,2x19,9x1,5 | Copper |
DIN7603-A17x21-CU | SEALING RING CU 17,2x20,9x1,5 | Copper |
DIN7603-A18x22-CU | SEALING RING CU 18,2x21,9x1,5 | Copper |
DIN7603-A20x24-CU | SEALING RING CU 20,2x23,9x1,5 | Copper |
DIN7603-A22x26-CU | SEALING RING CU 22,2x25,9x1,5 | Copper |
DIN7603-A27x32-CU | SEALING RING CU 27,3x31,9x1,5 | Copper |
DIN7603-A30x36-CU | SEALING RING CU 30,3x35,9x2,0 | Copper |
DIN7603-A33x39-CU | SEALING RING CU 33,3x38,9x2,0 | Copper |
