High Pressure Hydraulic Ball Valve High Pressure Hydraulic Ball Valve


High Pressure Hydraulic Ball Valve

Share to:
facebook sharing button
twitter sharing button
line sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
here are various types of ball valves, including 2-way, 3-way, 4-way, flange ball valves, and manifold mounting valves.
carbon steel
Stainless steel
High pressure range up to 800 bar

PDF Export

High Pressure Hydraulic Ball Valve

The valve handle drives the ball valve and causes it to rotate around the ball valve axis.Ball valves enable the regulation and control of fluids. There are various types of ball valves, including 2-way, 3-way, 4-way, flange ball valves, and manifold mounting valves. Multi-way ball valves in pipelines provide flexible control for combined flow, diversion, and flow direction switching. They can also close any channel and connect the other two channels.




(4) Flange ball valves

(5) Manifold mounting valves

Installation And Use

Before installation, blow out the pipeline on both sides of the ball valve and inspect the valve for any damages. Remove the protective parts from the flanges at both ends and clean the valve holes.

To install the valve:

1. Attach the valve to the pipeline.

2. Place a gasket between the valve flange and the pipeline flange according to the design requirements.

3. Tighten the flange bolts symmetrically, one by one, evenly.

Lastly, open and close the ball valve several times to ensure it works properly. Also, check the flange joint for any leaks or issues with the sealing. Ensuring everything is set up correctly for smooth fluid regulation and control.

Ensure that before operating the valve, you flush the lines and valves. To operate the valve, use the actuator to rotate the valve stem based on the input signal size. The valve is open when the indicator arrow aligns with the pipeline, and it is closed when the arrow is Vertical  to the pipeline.

Manufacturing Process

Sure, here's the information divided into separate paragraphs for better readability:

1. The process begins by cutting a large steel bar into a steel disc using a saw.

2. Next, a computer-guided blade drills holes in the steel disc.

3. They use another blade to cut the steel disc into the desired valve contour.

4. Then, they employ a grinding tool to precisely dimension the top of the valve.

5. Afterward, they place the steel valves into ceramic stones and rub them to make the surfaces smooth, preventing any liquid from spilling out of rough crevices.

Next, assemble the flanges to the end caps and place them in a rotary jig to weld them together. After cleaning the valve, start assembling the ball valve by inserting hollow steel balls into the body and securing the four corners of the valve. Finally, a handle and stop pin are fitted to the valve stem. So, turning the handle, the valve opens when the hole in the hollow steel ball is aligned with the flange, and closes when the two are Vertical .



Fitsch has been in the business of hydraulic tube fittings, hydraulic adapters, hose fittings, hydraulic flanges, industrial fittings and hydraulic accessories for over 20 years, offering all our customer competitive products and supplies from our local industry manufacturers union.    



   No.133-3 Anjiexi Road, Sanqishi Town, Yuyao 315412, China

Copyright  2024 Fitsch Ningbo International Trade Co.,ltd .  All rights reserved